Stone conservation need to note three bogey

Firstly, avoid direct wash with water

Natural stone, like natural wood, is a porous material that will breathe, so it is easy to absorb moisture or immerse it in water. Stone if the absorption of excessive moisture and pollution, will inevitably lead to a variety of stone lesions, such as: crack, weathering, falling off, floating, spit yellow, water spots, rust, white, matte and other annoying problems. So the stone should avoid rinsing with water or wet the mop to wash the stone surface. Even with a good stone for the protective agent, it is impossible to stop 100% long-term pollution, so to immediately remove the pollution.

Secondly, avoid contact with non-neutral items

All stone is afraid of acid and alkali. For example: acid often cause granite pyrite mineral oxidation and produce spit yellow phenomenon, the acid will decompose the calcium carbonate contained in the marble, causing the surface to be eroded, the alkali will erode granite feldspar and quartz Crystal grain boundary caused by the phenomenon of grain stripping. Another kind of non-neutral detergent or water-based wax, oily wax, acrylic wax and other wax, generally contain acidity, long time will make the stone surface gloss loss, residual agents will lead to future stone lesions.

Third, Long-term coverage of debris

In order to keep the stone breathe smoothly, should avoid the long-term coverage of the carpet surface of the carpet and debris, otherwise the words under the stone moisture can not be evaporated through the stone pores. The stone will be too heavy because of moisture, water content increased and produce annoying stone disease problems, such as you must lay the carpet, stacking debris, please do not forget to completely clean and clean. From time to time the use of dust and electrostatic drag to do a good job of dust and clean, whether it is hard texture of the granite or texture of the soft marble are not resistant to sand and soil particles long ravaged.